Analysis of the influence of chlorides in the mechanical behaviour of high-performance steel fibre reinforced cementitious composites
DOI:
https://doi.org/10.47842/juts.v4i1.29Palavras-chave:
HPSFRCC Surface corrosion, Steel fibre chlorides corrosionResumo
Steel fibres are used in high amounts in high-performance steel fibre reinforced cementitious composite (HPSFRCCs) and ultra-high-performance steel fibre reinforced cementitious composite (UHPSFRCCs) to enhance its structural performance. Due to the amount and randomly distribution of steel fibres in the cementitious matrix a level of damage in the aesthetic and mechanical response of fibres may be expected for structures under chloride exposition. This work aims to assess the structural behaviour of uncracked HPSFRCCs subjected to chlorides. Eight mixes of HPSFRCCs with different fibre content (40, 80, 120 and 160 kg/m3), with and without chlorides added to the mixes were designed. Prismatic specimens were cast and exposed to two curing conditions: initially in wet room and then in climatic room. The mechanical properties were obtained by means of the 3-point bending tests. The presence of corrosion in cross-section of the specimens were also analysed after mechanical tests by means of visual inspection. The results showed that the chloride added to the mixes has little influence on the post-cracking response of fibres.
Downloads
Referências
AENOR. UNE-EN 196-1:2005, Métodos de ensayo de cementos - Parte 1: Determinación de resistencias mecánicas, 2005.
AENOR. UNE-EN 12350-5:2009, Ensayos de hormigón fresco. Parte 5:ensayo de la mesa de sacudidas, 2009. Disponível em: <http://www.ubu.es/sites/default/files/portal_page/files/une_iso_690_2013.pdf>
ALIZADE, E.; JANDAGHI ALAEE, F.; ZABIHI, S. Effect of steel fiber corrosion on mechanical properties of steel fiber reinforced concrete. Asian Journal of Civil Engineering, v. 17, n. 2, p. 147–158, 2016.
ALVAREZ, A. B. Characterization and modelling of FSRC elements. [s.l.] PhD Thesis, 2013.
BALOUCH, S. U.; FORTH, J. P.; GRANJU, J.-L. Surface corrosion of steel fibre reinforced concrete. Cement and Concrete Research, v. 40, n. 3, p. 410–414, 2010.
BERROCAL, C. G.; LUNDGREN, K.; LÖFGREN, I. Corrosion of steel bars embedded in fibre reinforced concrete under chloride attack: State of the art. Cement and Concrete Research, v. 80, p. 69–85, 2016.
CARRILLO, J.; PULIDO, J. C.; APERADOR, W. Flexural mechanical properties of steel fiber reinforced concrete under corrosive environments. Revista ingeniería de construcción, v. 32, p. 59–72, 2017.
DAUBERSCHMIDT, C. Untersuchungen zu den Korrosionsmechanismen von Stahlfasern in chloridhaltigem Beton. [s.l.] Munich University, 2006.
DI PRISCO, M. Preface: FRC: Structural applications and standards. Materials and Structures/Materiaux et Constructions, v. 42, n. 9, p. 1169–1171, 2009.
DI PRISCO, M.; PLIZZARI, G.; VANDEWALLE, L. Fibre reinforced concrete: New design perspectives. Materials and Structures/Materiaux et Constructions, v. 42, n. 9, p. 1261–1281, 2009.
DOUSTI, A. et al. Binding of externally supplied chlorides in micro silica concrete under field exposure conditions. Cement and Concrete Composites, v. 33, n. 10, p. 1071–1079, 2011.
FRAZÃO, C. et al. Cement and Concrete Research Corrosion effects on pullout behavior of hooked steel fi bers in self-compacting concrete. v. 79, p. 112–122, 2016.
GRAEFF, A. . et al. Corrosion Durability of Recycled Steel Fibre Reinforced Concrete. Intersections/Intersectii. Anais...2009
GRANJU, J. L.; BALOUCH, S. U. Corrosion of steel fibre reinforced concrete from the cracks. Cement and Concrete Research, v. 35, n. 3, p. 572–577, 2005.
HOFF, G. . Durability of Fiber Reinforced Concrete in a Severe Marine Environment. ACI Spec. Publ. 100, p. 997–1042, 1987.
KIM, B.; BOYD, A. J.; LEE, J. Y. Durability performance of fiber-reinforced concrete in severe environments. Journal of Composite Materials, v. 45, n. 23, p. 2379–2389, 2011.
KLEIN, N. S. et al. Hormigón ligero autocompactante con fibras para rehabilitación de forjados. Materiales de Construcción, v. 61, n. 302, p. 239–256, 2011.
MANGAT, P.S. AND GURUSAMI, K. Corrosion resistance of steel fibres in concrete under marine exposure. Cement and Concrete Research, v. 18, n. 2, p. 44–54, 1988.
MANGAT, P. S.; GURUSAMY, K. Long-term properties of steel fibre reinforced marine concrete. Materials and Structures, v. 20, n. 4, p. 273–282, 1987.
MANGAT, P. S.; MOLLOY, B. . Size effect of reinforcement on corrosion initiation. 5th International RILEM Symposium on Fibre-Reinforced Cement Composites. Anais...Lyon, France: 2000
MANTEGAZZA, G.; GATTI, A. Aspects of durability of fiber reinforced concrete: workability and stress-corrosion. 6th RILEM symposium on fiber reinforced concrete (FRC) - BEFIB 2004. Anais...Varenna, Italy: 2004
MARCOS-MESON, V. et al. Corrosion resistance of steel fibre reinforced concrete - A literature review. Cement and Concrete Composites, v. 103, p. 1–20, 2018.
NAAMAN, A. E. Evaluation of steel fibers for applications in structural concrete. 6th RILEM symposium on fiber reinforced concrete (FRC) - BEFIB 2004, p. 389–400, 2004.
NEMEGEER, D.; VANBRABANT, J.; STANG, H. Brite Euram program on steel fibre concrete. Subtask: Durability : corrosion resistance of cracked fibre reinforced concrete. International RILEM Workshop on Test and Design Methods for Steelfibre Reinforced Concrete, p. 47–66, 2003.
NORDSTRÖM, E. Durability of Sprayed Concrete Steel Fibre Corrosion in Cracks. [s.l.] Lulea University of Technology, 2005.
PANZERA, T. H.; CHRISTOFORO, A. L.; RIBEIRO BORGES, P. H. High performance fibre-reinforced concrete (FRC) for civil engineering applications. Advanced Fibre-Reinforced Polymer (FRP) Composites for Structural Applications, p. 552–581, 2013.
RAMACHANDRAN, V. S. Possible states of chloride in the hydration of tricalcium silicate in the presence of calcium chloride. Matériaux et Constructions, v. 4, n. 1, p. 3–12, 1971.
RIZZUTI, L.; BENCARDINO, F. Effects of fibre volume fraction on the compressive and flexural experimental behaviour of SFRC. Contemporary Engineering Sciences, v. 7, n. 8, p. 379–390, 2014.
SADEGHI-POUYA, H. et al. Corrosion durability of high performance steel fibre reinforced concrete. Proceedings: Third International Conference on Sustainable Construction Materials and Technologies, Kyoto, Japan—August. Anais...2013
SERNA, P.; ARANGO, S. . Evolution of the flexural behaviour of precracked SFRC in marine environment. 17th International RILEM Symposium on Fibre Reinforced Concrete:Design and Applications. Anais...Chennai, India: 2008
THOMAS, J.; RAMASWAMY, A. Mechanical properties of steel fiber-reinforced concrete. Journal of Materials in Civil Engineering, v. 19, p. 385–392, 2007.
WEYDERT, R.; SCHIESSL, P. Korrosion von Stahlfasern in gerissenem und ungerissenem Stahlfaserbeton. IBAC 61, p. 1310–1315, 1996.
Downloads
Publicado
Como Citar
Edição
Seção
Licença
- O(s) autor(es) autoriza(m) a publicação do artigo na revista;
O(s) autor(es) autoriza(m) a publicação do texto na da revista;
O(s) autor(es) garantem que a contribuição é original e inédita e que não está em processo de avaliação em outra(s) revista(s);
A revista não se responsabiliza pelas opiniões, ideias e conceitos emitidos nos textos, por serem de inteira responsabilidade de seu(s) autor(es);
É reservado aos editores o direito de proceder a ajustes textuais e de adequação às normas da publicação.
Autores mantém os direitos autorais e concedem à revista o direito de primeira publicação, com o trabalho simultaneamente licenciado sob a Creative Commons Atribuição-NãoComercial 4.0 Internacional que permite o compartilhamento do trabalho com reconhecimento da autoria e publicação inicial nesta revista.
Autores têm autorização para assumir contratos adicionais separadamente, para distribuição não-exclusiva da versão do trabalho publicada nesta revista (ex.: publicar em repositório institucional ou como capítulo de livro), com reconhecimento de autoria e publicação inicial nesta revista.
Autores têm permissão e são estimulados a publicar e distribuir seu trabalho online (ex.: em repositórios institucionais ou na sua página pessoal) a qualquer ponto antes ou durante o processo editorial, já que isso pode gerar alterações produtivas, bem como aumentar o impacto e a citação do trabalho publicado (Veja O Efeito do Acesso Livre)