Corrosão superficial em compósitos cimentícios de alta resistência reforçados com fibras metálicas
DOI:
https://doi.org/10.47842/juts.v4i1.28Palavras-chave:
Steel fibre, HPSFRCC, Chlorides, Corrosion, Surface aspectResumo
High-performance steel fibre reinforced cementitious composites (HPSFRCCs) are usually produced with high contents of steel fibres. Therefore, more fibres are expected close to the surface. Despite the very dense matrix of these materials, the ingress of detrimental agents such as chlorides may occur. The objective of this work is to evaluate the mechanisms and effects of corrosion in HPSFRCCs specimens in terms of surface aspect. Eight mixes of HPSFRCCs with different fibre content (40, 80, 120 and 160 kg/m3), with and without chlorides added to the mixes were designed. Prismatic specimens were cast and exposed to two curing conditions: initially in wet room and then in climatic room. Surface aspect was assessed by visual analysis with the use of a classification criteria. Results showed that the chloride added to the mixes induced a damage related to the superficial aspect whereas the specimens without chlorides presented no sign of corrosion over time.Downloads
Referências
ABBAS, S. Structural and Durability Performance of Precast Segmental Tunnel Lining. [s.l.] University of Western Ontario, 2014.
AENOR. UNE-EN 196-1:2005, Métodos de ensayo de cementos - Parte 1: Determinación de resistencias mecánicas, 2005.
AENOR. UNE-EN 12350-5:2009, Ensayos de hormigón fresco. Parte 5:ensayo de la mesa de sacudidas, 2009. Disponível em: <http://www.ubu.es/sites/default/files/portal_page/files/une_iso_690_2013.pdf>
AENOR. UNE-EN 1097-6. Ensayos para determinar las propiedades de los áridosmecánicas y físicas. Parte 6: Determinación de la densidad de e partículas y la absorción de agua., 2014. Disponível em: <http://www.ubu.es/sites/default/files/portal_page/files/une_iso_690_2013.pdf>
AFROUGHSABET, V.; BIOLZI, L.; OZBAKKALOGLU, T. High-performance fiber-reinforced concrete: a review. [s.l: s.n.]. v. 51 DOI: https://doi.org/10.1007/s10853-016-9917-4
BALOUCH, S. U.; FORTH, J. P.; GRANJU, J. L. Surface corrosion of steel fibre reinforced concrete. Cement and Concrete Research, v. 40, n. 3, p. 410–414, 2010. DOI: https://doi.org/10.1016/j.cemconres.2009.10.001
BERROCAL, C. G.; LÖFGREN, I.; LUNDGREN, K. The e ff ect of fi bres on steel bar corrosion and fl exural behaviour of corroded RC beams. v. 163, n. February, p. 409–425, 2018. DOI: https://doi.org/10.1016/j.engstruct.2018.02.068
BERROCAL, C.; LUNDGREN, K.; LÖFGREN, I. Influence of Steel Fibres on Corrosion of Reinforcement in Concrete in Chloride Environments: A Review. 7th International Conference Fibre Concrete 2013. Anais...Prague, Czech Republic: 2013Disponível em: <http://www.researchgate.net/publication/257140331_Influence_of_steel_fibres_on_corrosion_of_reinforcement_in_concrete_in_chloride_environments_a_review/file/9c9605248034292efd.pdf>
BRANDT, A. M. Fibre reinforced cement-based (FRC) composites after over 40 years of development in building and civil engineering. Composite Structures, v. 86, n. 1–3, p. 3–9, 2008. DOI: https://doi.org/10.1016/j.compstruct.2008.03.006
CHP. Instrucción de Hormigón Estructural EHE-08,. Madrid, 2008.
CORINALDESI, V.; MORICONI, G. Durable fiber reinforced self-compacting concrete. Cement and Concrete Research, v. 34, n. 2, p. 249–254, 2004. DOI: https://doi.org/10.1016/j.cemconres.2003.07.005
DAUBERSCHMIDT, C. Untersuchungen zu den Korrosionsmechanismen von Stahlfasern in chloridhaltigem Beton. [s.l.] Munich University, 2006.
FRAZÃO, C. et al. Cement and Concrete Research Corrosion effects on pullout behavior of hooked steel fi bers in self-compacting concrete. v. 79, p. 112–122, 2016. DOI: https://doi.org/10.1016/j.cemconres.2015.09.005
GHODS, P. Multi-Scale Investigation of the Formation and Breakdown of Passive Films on Carbon Steel Rebar in Concrete. [s.l: s.n.].
GRAEFF, A. . et al. Corrosion Durability of Recycled Steel Fibre Reinforced Concrete. Intersections/Intersectii. Anais...2009
INTERNATIONAL FEDERATION FOR STRUCTURAL CONCRETE. fib. Model Code 2010, 2010.
JOHNSTON, C. D. Steel fibre-reinforced concrete - present and future in engineering construction. Composites, v. 13, n. 2, p. 113–121, 1982. DOI: https://doi.org/10.1016/0010-4361(82)90047-7
KLEIN, N. S. et al. Hormigón ligero autocompactante con fibras para rehabilitación de forjados. Materiales de Construcción, v. 61, n. 302, p. 239–256, 2011. DOI: https://doi.org/10.3989/mc.2011.55509
MANGAT, P.S. AND GURUSAMI, K. Corrosion resistance of steel fibres in concrete under marine exposure. Cement and Concrete Research, v. 18, n. 2, p. 44–54, 1988. DOI: https://doi.org/10.1016/0008-8846(88)90120-2
MANGAT, P. S.; GURUSAMY, K. Permissible crack widths in steel fibre reinforced marine concrete. Materials and Structures, v. 20, n. 5, p. 338–347, 1987. DOI: https://doi.org/10.1007/BF02472580
MARCOS-MESON, V. et al. Corrosion resistance of steel fibre reinforced concrete - A literature review. Cement and Concrete Composites, v. 103, p. 1–20, 2018. DOI: https://doi.org/10.1016/j.cemconres.2017.05.016
MINDESS, S. Thirty years of fibre reinforced concrete research at the University of British Columbia. P. Int, Sustainable construction materials and technologies, p. 259–268, 2007.
NAAMAN, A. E. Fiber reinforcements for concrete: looking back, looking aheadFifth RILEM Symposium on Fibre-Reinforced Concretes (FRC) - BEFIB’ 2000, 2000.
RODRIGUEZ, O. G. Influence of cracks on chloride ingress into concrete. [s.l.] PhD Thesis, 2001.
SERNA, P.; ARANGO, S. . Evolution of the flexural behaviour of precracked SFRC in marine environment. 17th International RILEM Symposium on Fibre Reinforced Concrete:Design and Applications. Anais...Chennai, India: 2008
SOLGAARD, A.; KÜTER, A.; EDVARDSEN, C. Durability Aspects of Steel Fibre Reinforced Concrete in Civil Infrastructure. 2nd International Symposium on Service Life Design for Infrastructures, n. October, p. 229–236, 2010.
TRÜB, M. Numerical Modeling of High Performance Fiber Reinforced Cementitious Composites Acknowledgments. [s.l.] PhD Thesis, 2011.
WEYDERT, R.; SCHIESSL, P. Korrosion von Stahlfasern in gerissenem und und ungerissenem stahlfaserbeton. Abschlussbericht, Edition ed. Bergisch Gladbach, Germany, 1998.
Downloads
Publicado
Como Citar
Edição
Seção
Licença
- O(s) autor(es) autoriza(m) a publicação do artigo na revista;
O(s) autor(es) autoriza(m) a publicação do texto na da revista;
O(s) autor(es) garantem que a contribuição é original e inédita e que não está em processo de avaliação em outra(s) revista(s);
A revista não se responsabiliza pelas opiniões, ideias e conceitos emitidos nos textos, por serem de inteira responsabilidade de seu(s) autor(es);
É reservado aos editores o direito de proceder a ajustes textuais e de adequação às normas da publicação.
Autores mantém os direitos autorais e concedem à revista o direito de primeira publicação, com o trabalho simultaneamente licenciado sob a Creative Commons Atribuição-NãoComercial 4.0 Internacional que permite o compartilhamento do trabalho com reconhecimento da autoria e publicação inicial nesta revista.
Autores têm autorização para assumir contratos adicionais separadamente, para distribuição não-exclusiva da versão do trabalho publicada nesta revista (ex.: publicar em repositório institucional ou como capítulo de livro), com reconhecimento de autoria e publicação inicial nesta revista.
Autores têm permissão e são estimulados a publicar e distribuir seu trabalho online (ex.: em repositórios institucionais ou na sua página pessoal) a qualquer ponto antes ou durante o processo editorial, já que isso pode gerar alterações produtivas, bem como aumentar o impacto e a citação do trabalho publicado (Veja O Efeito do Acesso Livre)